Neodur FT Elastic
Description
Fast-curing, cold-applied elastic aliphatic polyurea system, suitable for the protection of floors, where outstanding waterproofing properties and high resistance to abrasion and mechanical stress are required
Fields of application
▪ Roof parking decks
▪ Balconies & terraces with high traffic
▪ Tiled surfaces
▪ As a wear-resistant topcoat over Neoproof® Polyurea coatings
▪ As a topcoat over aromatic waterproofing systems
The surfaces require appropriate preparation and priming prior to the application of Neodur® FT Elastic.
Properties – Advantages
▪ Combines mechanical durability with outstanding waterproofing properties (zero water absorption)
▪ Unaffected by UV radiation and adverse weather conditions
▪ Fast-drying & resistant to early rainfall
▪ High resistance to abrasion and mechanical stress
▪ Excellent chemical resistance (dilute acids, alkalis, petroleum, etc.)
TECHNICAL CHARACTERISTICS
Mixing ratio A:B (by weight)
Gloss (60 oC)
Elongation at break (ASTM D412)
Tensile strength at break (ASTM D412)
Adhesion strength (EN 13892-8, concrete)
Abrasion resistance (Taber test, CS 10/1000/1000, (ASTM D4060)
Impact resistance (EN ISO 6272)
Flexibility (ASTM D522, 180 o bend, 1/8” mandrel)
Skid resistance (EN 13036-4, wet surface, with 2,5% w/w addition of Neotex Antiskid M)
Service temperature
3:2,5
85
170%
14MPa
>3N/mm2
75mg
IR4
Pass
35 (PTV scale)
-30oC min /+80oC max
APPLICATION CONDITIONS - CURING DETAILS
Substrate moisture content
Relative air humidity
Ambient temperature
Pot life (+25oC)
Dry to recoat (+25oC) – walkability (+25oC)
Dry to recoat – Heavy traffic (+25oC)
Consumption
>4%
80% max
+5 oC min /+35 oC max
30 minutes
4 hours
24 hours
300gr/m2 per layer (depending on substrate)